The bottle turns white or deformed

Reason: Heating temperature is too high or too low.

Solution: Adjust the temperature of the corresponding section of the lamp tube according to the whitening position, or adjust the cooling water outlet valve of the bottle mouth.

Bottle pockmarks

Reason: Residual plastic or scale on the mold.

Solution: Clean the adhesive on the mold and regularly wipe the surface of the mold with alcohol.

Machine noise or jamming

Reason: Wear or looseness of transmission components.

Solution: Check whether the belt, chain, and gear are worn and replace them in a timely manner; Restart the machine or manually reset the robotic arm.

Insufficient air pressure or air leakage

Reason: Aging of the trachea or loose joints.

Solution: Apply soapy water to the trachea and joints, and check for any air leaks; Replace the aging trachea or tighten the connector.